Begin by removing all exterior screws. First, take off the left side panel and keep the LCD open. Then remove the back panel, being careful to disconnect the small ribbon cable. Next, disconnect the marked LCD cable and unscrew the two screws holding the LCD assembly. There should be a third screw for the LCD, […]
Tag: astro canon
Modifying any camera for astrophotography can be challenging. The tool needed is a measuring gauge, caliper or other precise instrument to measure sensor’s distance from the camera chassis. However, on some cameras we can just screw in tight the three sensor screws and the sensor most likely will be leveled. We might lose the ability […]